perlvar

(source, CPAN)

You are viewing the version of this documentation from Perl 5.005_04. View the latest version

NAME
DESCRIPTION

#NAME

perlvar - Perl predefined variables

#DESCRIPTION

#Predefined Names

The following names have special meaning to Perl. Most punctuation names have reasonable mnemonics, or analogues in one of the shells. Nevertheless, if you wish to use long variable names, you just need to say

use English;

at the top of your program. This will alias all the short names to the long names in the current package. Some even have medium names, generally borrowed from awk.

Due to an unfortunate accident of Perl's implementation, "use English" imposes a considerable performance penalty on all regular expression matches in a program, regardless of whether they occur in the scope of "use English". For that reason, saying "use English" in libraries is strongly discouraged. See the Devel::SawAmpersand module documentation from CPAN (http://www.perl.com/CPAN/modules/by-module/Devel/Devel-SawAmpersand-0.10.readme) for more information.

To go a step further, those variables that depend on the currently selected filehandle may instead (and preferably) be set by calling an object method on the FileHandle object. (Summary lines below for this contain the word HANDLE.) First you must say

use FileHandle;

after which you may use either

method HANDLE EXPR

or more safely,

HANDLE->method(EXPR)

Each of the methods returns the old value of the FileHandle attribute. The methods each take an optional EXPR, which if supplied specifies the new value for the FileHandle attribute in question. If not supplied, most of the methods do nothing to the current value, except for autoflush(), which will assume a 1 for you, just to be different.

A few of these variables are considered "read-only". This means that if you try to assign to this variable, either directly or indirectly through a reference, you'll raise a run-time exception.

The following list is ordered by scalar variables first, then the arrays, then the hashes (except $^M was added in the wrong place). This is somewhat obscured by the fact that %ENV and %SIG are listed as $ENV{expr} and $SIG{expr}.

#$ARG

#$_

The default input and pattern-searching space. The following pairs are equivalent:

while (<>) {...}	# equivalent in only while!
while (defined($_ = <>)) {...}

/^Subject:/
$_ =~ /^Subject:/

tr/a-z/A-Z/
$_ =~ tr/a-z/A-Z/

chop
chop($_)

Here are the places where Perl will assume $_ even if you don't use it:

Various unary functions, including functions like ord() and int(), as well as the all file tests (-f, -d) except for -t, which defaults to STDIN.
Various list functions like print() and unlink().
The pattern matching operations m//, s///, and tr/// when used without an =~ operator.
The default iterator variable in a foreach loop if no other variable is supplied.
The implicit iterator variable in the grep() and map() functions.
The default place to put an input record when a <FH> operation's result is tested by itself as the sole criterion of a while test. Note that outside of a while test, this will not happen.

(Mnemonic: underline is understood in certain operations.)

#$<digits>

Contains the subpattern from the corresponding set of parentheses in the last pattern matched, not counting patterns matched in nested blocks that have been exited already. (Mnemonic: like \digits.) These variables are all read-only.

#$MATCH

#$&

The string matched by the last successful pattern match (not counting any matches hidden within a BLOCK or eval() enclosed by the current BLOCK). (Mnemonic: like & in some editors.) This variable is read-only.

The use of this variable anywhere in a program imposes a considerable performance penalty on all regular expression matches. See the Devel::SawAmpersand module from CPAN for more information.

#$PREMATCH

#$`

The string preceding whatever was matched by the last successful pattern match (not counting any matches hidden within a BLOCK or eval enclosed by the current BLOCK). (Mnemonic: ` often precedes a quoted string.) This variable is read-only.

The use of this variable anywhere in a program imposes a considerable performance penalty on all regular expression matches. See the Devel::SawAmpersand module from CPAN for more information.

#$POSTMATCH

#$'

The string following whatever was matched by the last successful pattern match (not counting any matches hidden within a BLOCK or eval() enclosed by the current BLOCK). (Mnemonic: ' often follows a quoted string.) Example:

$_ = 'abcdefghi';
/def/;
print "$`:$&:$'\n";  	# prints abc:def:ghi

This variable is read-only.

The use of this variable anywhere in a program imposes a considerable performance penalty on all regular expression matches. See the Devel::SawAmpersand module from CPAN for more information.

#$LAST_PAREN_MATCH

#$+

The last bracket matched by the last search pattern. This is useful if you don't know which of a set of alternative patterns matched. For example:

/Version: (.*)|Revision: (.*)/ && ($rev = $+);

(Mnemonic: be positive and forward looking.) This variable is read-only.

#$MULTILINE_MATCHING

#$*

Set to 1 to do multi-line matching within a string, 0 to tell Perl that it can assume that strings contain a single line, for the purpose of optimizing pattern matches. Pattern matches on strings containing multiple newlines can produce confusing results when "$*" is 0. Default is 0. (Mnemonic: * matches multiple things.) Note that this variable influences the interpretation of only "^" and "$". A literal newline can be searched for even when $* == 0.

Use of "$*" is deprecated in modern Perls, supplanted by the /s and /m modifiers on pattern matching.

#input_line_number HANDLE EXPR

#$INPUT_LINE_NUMBER

#$NR

#$.

The current input line number for the last file handle from which you read (or performed a seek or tell on). The value may be different from the actual physical line number in the file, depending on what notion of "line" is in effect--see "" in $ on how to affect that. An explicit close on a filehandle resets the line number. Because "<>" never does an explicit close, line numbers increase across ARGV files (but see examples under eof()). Localizing $. has the effect of also localizing Perl's notion of "the last read filehandle". (Mnemonic: many programs use "." to mean the current line number.)

#input_record_separator HANDLE EXPR

#$INPUT_RECORD_SEPARATOR

#$RS

#$/

The input record separator, newline by default. This is used to influence Perl's idea of what a "line" is. Works like awk's RS variable, including treating empty lines as delimiters if set to the null string. (Note: An empty line cannot contain any spaces or tabs.) You may set it to a multi-character string to match a multi-character delimiter, or to undef to read to end of file. Note that setting it to "\n\n" means something slightly different than setting it to "", if the file contains consecutive empty lines. Setting it to "" will treat two or more consecutive empty lines as a single empty line. Setting it to "\n\n" will blindly assume that the next input character belongs to the next paragraph, even if it's a newline. (Mnemonic: / is used to delimit line boundaries when quoting poetry.)

undef $/;		# enable "slurp" mode
$_ = <FH>;		# whole file now here
s/\n[ \t]+/ /g;

Remember: the value of $/ is a string, not a regexp. AWK has to be better for something :-)

Setting $/ to a reference to an integer, scalar containing an integer, or scalar that's convertable to an integer will attempt to read records instead of lines, with the maximum record size being the referenced integer. So this:

$/ = \32768; # or \"32768", or \$var_containing_32768
open(FILE, $myfile);
$_ = <FILE>;

will read a record of no more than 32768 bytes from FILE. If you're not reading from a record-oriented file (or your OS doesn't have record-oriented files), then you'll likely get a full chunk of data with every read. If a record is larger than the record size you've set, you'll get the record back in pieces.

On VMS, record reads are done with the equivalent of sysread, so it's best not to mix record and non-record reads on the same file. (This is likely not a problem, as any file you'd want to read in record mode is probably usable in line mode) Non-VMS systems perform normal I/O, so it's safe to mix record and non-record reads of a file.

Also see $..

#autoflush HANDLE EXPR

#$OUTPUT_AUTOFLUSH

#$|

If set to nonzero, forces a flush right away and after every write or print on the currently selected output channel. Default is 0 (regardless of whether the channel is actually buffered by the system or not; $| tells you only whether you've asked Perl explicitly to flush after each write). Note that STDOUT will typically be line buffered if output is to the terminal and block buffered otherwise. Setting this variable is useful primarily when you are outputting to a pipe, such as when you are running a Perl script under rsh and want to see the output as it's happening. This has no effect on input buffering. (Mnemonic: when you want your pipes to be piping hot.)

#output_field_separator HANDLE EXPR

#$OUTPUT_FIELD_SEPARATOR

#$OFS

#$,

The output field separator for the print operator. Ordinarily the print operator simply prints out the comma-separated fields you specify. To get behavior more like awk, set this variable as you would set awk's OFS variable to specify what is printed between fields. (Mnemonic: what is printed when there is a , in your print statement.)

#output_record_separator HANDLE EXPR

#$OUTPUT_RECORD_SEPARATOR

#$ORS

#$\

The output record separator for the print operator. Ordinarily the print operator simply prints out the comma-separated fields you specify, with no trailing newline or record separator assumed. To get behavior more like awk, set this variable as you would set awk's ORS variable to specify what is printed at the end of the print. (Mnemonic: you set "$\" instead of adding \n at the end of the print. Also, it's just like $/, but it's what you get "back" from Perl.)

#$LIST_SEPARATOR

#$"

This is like "$," except that it applies to array values interpolated into a double-quoted string (or similar interpreted string). Default is a space. (Mnemonic: obvious, I think.)

#$SUBSCRIPT_SEPARATOR

#$SUBSEP

#$;

The subscript separator for multidimensional array emulation. If you refer to a hash element as

$foo{$a,$b,$c}

it really means

$foo{join($;, $a, $b, $c)}

But don't put

@foo{$a,$b,$c}	# a slice--note the @

which means

($foo{$a},$foo{$b},$foo{$c})

Default is "\034", the same as SUBSEP in awk. Note that if your keys contain binary data there might not be any safe value for "$;". (Mnemonic: comma (the syntactic subscript separator) is a semi-semicolon. Yeah, I know, it's pretty lame, but "$," is already taken for something more important.)

Consider using "real" multidimensional arrays.

#$OFMT

#$#

The output format for printed numbers. This variable is a half-hearted attempt to emulate awk's OFMT variable. There are times, however, when awk and Perl have differing notions of what is in fact numeric. The initial value is %.ng, where n is the value of the macro DBL_DIG from your system's float.h. This is different from awk's default OFMT setting of %.6g, so you need to set "$#" explicitly to get awk's value. (Mnemonic: # is the number sign.)

Use of "$#" is deprecated.

#format_page_number HANDLE EXPR

#$FORMAT_PAGE_NUMBER

#$%

The current page number of the currently selected output channel. (Mnemonic: % is page number in nroff.)

#format_lines_per_page HANDLE EXPR

#$FORMAT_LINES_PER_PAGE

#$=

The current page length (printable lines) of the currently selected output channel. Default is 60. (Mnemonic: = has horizontal lines.)

#format_lines_left HANDLE EXPR

#$FORMAT_LINES_LEFT

#$-

The number of lines left on the page of the currently selected output channel. (Mnemonic: lines_on_page - lines_printed.)

#format_name HANDLE EXPR

#$FORMAT_NAME

#$~

The name of the current report format for the currently selected output channel. Default is name of the filehandle. (Mnemonic: brother to "$^".)

#format_top_name HANDLE EXPR

#$FORMAT_TOP_NAME

#$^

The name of the current top-of-page format for the currently selected output channel. Default is name of the filehandle with _TOP appended. (Mnemonic: points to top of page.)

#format_line_break_characters HANDLE EXPR

#$FORMAT_LINE_BREAK_CHARACTERS

#$:

The current set of characters after which a string may be broken to fill continuation fields (starting with ^) in a format. Default is " \n-", to break on whitespace or hyphens. (Mnemonic: a "colon" in poetry is a part of a line.)

#format_formfeed HANDLE EXPR

#$FORMAT_FORMFEED

#$^L

What formats output to perform a form feed. Default is \f.

#$ACCUMULATOR

#$^A

The current value of the write() accumulator for format() lines. A format contains formline() commands that put their result into $^A. After calling its format, write() prints out the contents of $^A and empties. So you never actually see the contents of $^A unless you call formline() yourself and then look at it. See perlform and "formline()" in perlfunc.

#$CHILD_ERROR

#$?

The status returned by the last pipe close, backtick (``) command, or system() operator. Note that this is the status word returned by the wait() system call (or else is made up to look like it). Thus, the exit value of the subprocess is actually ($? >> 8), and $? & 127 gives which signal, if any, the process died from, and $? & 128 reports whether there was a core dump. (Mnemonic: similar to sh and ksh.)

Additionally, if the h_errno variable is supported in C, its value is returned via $? if any of the gethost*() functions fail.

Note that if you have installed a signal handler for SIGCHLD, the value of $? will usually be wrong outside that handler.

Inside an END subroutine $? contains the value that is going to be given to exit(). You can modify $? in an END subroutine to change the exit status of the script.

Under VMS, the pragma use vmsish 'status' makes $? reflect the actual VMS exit status, instead of the default emulation of POSIX status.

Also see "Error Indicators".

#$OS_ERROR

#$ERRNO

#$!

If used in a numeric context, yields the current value of errno, with all the usual caveats. (This means that you shouldn't depend on the value of $! to be anything in particular unless you've gotten a specific error return indicating a system error.) If used in a string context, yields the corresponding system error string. You can assign to $! to set errno if, for instance, you want "$!" to return the string for error n, or you want to set the exit value for the die() operator. (Mnemonic: What just went bang?)

Also see "Error Indicators".

#$EXTENDED_OS_ERROR

#$^E

Error information specific to the current operating system. At the moment, this differs from $! under only VMS, OS/2, and Win32 (and for MacPerl). On all other platforms, $^E is always just the same as $!.

Under VMS, $^E provides the VMS status value from the last system error. This is more specific information about the last system error than that provided by $!. This is particularly important when $! is set to EVMSERR.

Under OS/2, $^E is set to the error code of the last call to OS/2 API either via CRT, or directly from perl.

Under Win32, $^E always returns the last error information reported by the Win32 call GetLastError() which describes the last error from within the Win32 API. Most Win32-specific code will report errors via $^E. ANSI C and UNIX-like calls set errno and so most portable Perl code will report errors via $!.

Caveats mentioned in the description of $! generally apply to $^E, also. (Mnemonic: Extra error explanation.)

Also see "Error Indicators".

#$EVAL_ERROR

#$@

The Perl syntax error message from the last eval() command. If null, the last eval() parsed and executed correctly (although the operations you invoked may have failed in the normal fashion). (Mnemonic: Where was the syntax error "at"?)

Note that warning messages are not collected in this variable. You can, however, set up a routine to process warnings by setting $SIG{__WARN__} as described below.

Also see "Error Indicators".

#$PROCESS_ID

#$PID

#$$

The process number of the Perl running this script. (Mnemonic: same as shells.)

#$REAL_USER_ID

#$UID

#$<

The real uid of this process. (Mnemonic: it's the uid you came FROM, if you're running setuid.)

#$EFFECTIVE_USER_ID

#$EUID

#$>

The effective uid of this process. Example:

$< = $>;		# set real to effective uid
($<,$>) = ($>,$<);	# swap real and effective uid

(Mnemonic: it's the uid you went TO, if you're running setuid.) Note: "$<" and "$>" can be swapped only on machines supporting setreuid().

#$REAL_GROUP_ID

#$GID

#$(

The real gid of this process. If you are on a machine that supports membership in multiple groups simultaneously, gives a space separated list of groups you are in. The first number is the one returned by getgid(), and the subsequent ones by getgroups(), one of which may be the same as the first number.

However, a value assigned to "$(" must be a single number used to set the real gid. So the value given by "$(" should not be assigned back to "$(" without being forced numeric, such as by adding zero.

(Mnemonic: parentheses are used to GROUP things. The real gid is the group you LEFT, if you're running setgid.)

#$EFFECTIVE_GROUP_ID

#$EGID

#$)

The effective gid of this process. If you are on a machine that supports membership in multiple groups simultaneously, gives a space separated list of groups you are in. The first number is the one returned by getegid(), and the subsequent ones by getgroups(), one of which may be the same as the first number.

Similarly, a value assigned to "$)" must also be a space-separated list of numbers. The first number is used to set the effective gid, and the rest (if any) are passed to setgroups(). To get the effect of an empty list for setgroups(), just repeat the new effective gid; that is, to force an effective gid of 5 and an effectively empty setgroups() list, say $) = "5 5" .

(Mnemonic: parentheses are used to GROUP things. The effective gid is the group that's RIGHT for you, if you're running setgid.)

Note: "$<", "$>", "$(" and "$)" can be set only on machines that support the corresponding set[re][ug]id() routine. "$(" and "$)" can be swapped only on machines supporting setregid().

#$PROGRAM_NAME

#$0

Contains the name of the file containing the Perl script being executed. On some operating systems assigning to "$0" modifies the argument area that the ps(1) program sees. This is more useful as a way of indicating the current program state than it is for hiding the program you're running. (Mnemonic: same as sh and ksh.)

#$[

The index of the first element in an array, and of the first character in a substring. Default is 0, but you could set it to 1 to make Perl behave more like awk (or Fortran) when subscripting and when evaluating the index() and substr() functions. (Mnemonic: [ begins subscripts.)

As of Perl 5, assignment to "$[" is treated as a compiler directive, and cannot influence the behavior of any other file. Its use is discouraged.

#$PERL_VERSION

#$]

The version + patchlevel / 1000 of the Perl interpreter. This variable can be used to determine whether the Perl interpreter executing a script is in the right range of versions. (Mnemonic: Is this version of perl in the right bracket?) Example:

warn "No checksumming!\n" if $] < 3.019;

See also the documentation of use VERSION and require VERSION for a convenient way to fail if the Perl interpreter is too old.

#$COMPILING

#$^C

The current value of the flag associated with the -c switch. Mainly of use with -MO=... to allow code to alter its behaviour when being compiled. (For example to automatically AUTOLOADing at compile time rather than normal deferred loading.) Setting $^C = 1 is similar to calling B::minus_c.

#$DEBUGGING

#$^D

The current value of the debugging flags. (Mnemonic: value of -D switch.)

#$SYSTEM_FD_MAX

#$^F

The maximum system file descriptor, ordinarily 2. System file descriptors are passed to exec()ed processes, while higher file descriptors are not. Also, during an open(), system file descriptors are preserved even if the open() fails. (Ordinary file descriptors are closed before the open() is attempted.) Note that the close-on-exec status of a file descriptor will be decided according to the value of $^F when the open() or pipe() was called, not the time of the exec().

#$^H

The current set of syntax checks enabled by use strict and other block scoped compiler hints. See the documentation of strict for more details.

#$INPLACE_EDIT

#$^I

The current value of the inplace-edit extension. Use undef to disable inplace editing. (Mnemonic: value of -i switch.)

#$^M

By default, running out of memory it is not trappable. However, if compiled for this, Perl may use the contents of $^M as an emergency pool after die()ing with this message. Suppose that your Perl were compiled with -DPERL_EMERGENCY_SBRK and used Perl's malloc. Then

$^M = 'a' x (1<<16);

would allocate a 64K buffer for use when in emergency. See the INSTALL file for information on how to enable this option. As a disincentive to casual use of this advanced feature, there is no English long name for this variable.

#$OSNAME

#$^O

The name of the operating system under which this copy of Perl was built, as determined during the configuration process. The value is identical to $Config{'osname'}.

#$PERLDB

#$^P

The internal variable for debugging support. Different bits mean the following (subject to change):

#0x01: Debug subroutine enter/exit.
#0x02: Line-by-line debugging.
#0x04: Switch off optimizations.
#0x08: Preserve more data for future interactive inspections.
#0x10: Keep info about source lines on which a subroutine is defined.
#0x20: Start with single-step on.

Note that some bits may be relevant at compile-time only, some at run-time only. This is a new mechanism and the details may change.

#$^R

The result of evaluation of the last successful "(?{ code })" in perlre regular expression assertion. (Excluding those used as switches.) May be written to.

#$^S

Current state of the interpreter. Undefined if parsing of the current module/eval is not finished (may happen in $SIG{__DIE__} and $SIG{__WARN__} handlers). True if inside an eval, otherwise false.

#$BASETIME

#$^T

The time at which the script began running, in seconds since the epoch (beginning of 1970). The values returned by the -M, -A, and -C filetests are based on this value.

#$WARNING

#$^W

The current value of the warning switch, either TRUE or FALSE. (Mnemonic: related to the -w switch.)

#$EXECUTABLE_NAME

#$^X

The name that the Perl binary itself was executed as, from C's argv[0].

#$ARGV

contains the name of the current file when reading from <>.

#@ARGV

The array @ARGV contains the command line arguments intended for the script. Note that $#ARGV is the generally number of arguments minus one, because $ARGV[0] is the first argument, NOT the command name. See "$0" for the command name.

#@INC

The array @INC contains the list of places to look for Perl scripts to be evaluated by the do EXPR, require, or use constructs. It initially consists of the arguments to any -I command line switches, followed by the default Perl library, probably /usr/local/lib/perl, followed by ".", to represent the current directory. If you need to modify this at runtime, you should use the use lib pragma to get the machine-dependent library properly loaded also:

use lib '/mypath/libdir/';
use SomeMod;

#@_

Within a subroutine the array @_ contains the parameters passed to that subroutine. See perlsub.

#%INC

The hash %INC contains entries for each filename that has been included via do or require. The key is the filename you specified, and the value is the location of the file actually found. The require command uses this array to determine whether a given file has already been included.

#%ENV

#$ENV{expr}

The hash %ENV contains your current environment. Setting a value in ENV changes the environment for child processes.

#%SIG

#$SIG{expr}

The hash %SIG is used to set signal handlers for various signals. Example:

    sub handler {	# 1st argument is signal name
	my($sig) = @_;
	print "Caught a SIG$sig--shutting down\n";
	close(LOG);
	exit(0);
    }

    $SIG{'INT'}  = \&handler;
    $SIG{'QUIT'} = \&handler;
    ...
    $SIG{'INT'} = 'DEFAULT';	# restore default action
    $SIG{'QUIT'} = 'IGNORE';	# ignore SIGQUIT

Using a value of 'IGNORE' usually has the effect of ignoring the signal, except for the CHLD signal. See perlipc for more about this special case.

The %SIG array contains values for only the signals actually set within the Perl script. Here are some other examples:

$SIG{"PIPE"} = Plumber;     # SCARY!!
$SIG{"PIPE"} = "Plumber";   # assumes main::Plumber (not recommended)
$SIG{"PIPE"} = \&Plumber;   # just fine; assume current Plumber
$SIG{"PIPE"} = Plumber();   # oops, what did Plumber() return??

The one marked scary is problematic because it's a bareword, which means sometimes it's a string representing the function, and sometimes it's going to call the subroutine call right then and there! Best to be sure and quote it or take a reference to it. *Plumber works too. See perlsub.

If your system has the sigaction() function then signal handlers are installed using it. This means you get reliable signal handling. If your system has the SA_RESTART flag it is used when signals handlers are installed. This means that system calls for which it is supported continue rather than returning when a signal arrives. If you want your system calls to be interrupted by signal delivery then do something like this:

use POSIX ':signal_h';

my $alarm = 0;
sigaction SIGALRM, new POSIX::SigAction sub { $alarm = 1 }
	or die "Error setting SIGALRM handler: $!\n";

See POSIX.

Certain internal hooks can be also set using the %SIG hash. The routine indicated by $SIG{__WARN__} is called when a warning message is about to be printed. The warning message is passed as the first argument. The presence of a __WARN__ hook causes the ordinary printing of warnings to STDERR to be suppressed. You can use this to save warnings in a variable, or turn warnings into fatal errors, like this:

local $SIG{__WARN__} = sub { die $_[0] };
eval $proggie;

The routine indicated by $SIG{__DIE__} is called when a fatal exception is about to be thrown. The error message is passed as the first argument. When a __DIE__ hook routine returns, the exception processing continues as it would have in the absence of the hook, unless the hook routine itself exits via a goto, a loop exit, or a die(). The __DIE__ handler is explicitly disabled during the call, so that you can die from a __DIE__ handler. Similarly for __WARN__.

Note that the $SIG{__DIE__} hook is called even inside eval()ed blocks/strings. See "die" in perlfunc and "$^S" in perlvar for how to circumvent this.

Note that __DIE__/__WARN__ handlers are very special in one respect: they may be called to report (probable) errors found by the parser. In such a case the parser may be in inconsistent state, so any attempt to evaluate Perl code from such a handler will probably result in a segfault. This means that calls which result/may-result in parsing Perl should be used with extreme caution, like this:

require Carp if defined $^S;
Carp::confess("Something wrong") if defined &Carp::confess;
die "Something wrong, but could not load Carp to give backtrace...
     To see backtrace try starting Perl with -MCarp switch";

Here the first line will load Carp unless it is the parser who called the handler. The second line will print backtrace and die if Carp was available. The third line will be executed only if Carp was not available.

See "die" in perlfunc, "warn" in perlfunc and "eval" in perlfunc for additional info.

#Error Indicators

The variables $@, $!, $^E, and $? contain information about different types of error conditions that may appear during execution of Perl script. The variables are shown ordered by the "distance" between the subsystem which reported the error and the Perl process, and correspond to errors detected by the Perl interpreter, C library, operating system, or an external program, respectively.

To illustrate the differences between these variables, consider the following Perl expression:

   eval '
	 open PIPE, "/cdrom/install |";
         @res = <PIPE>;
	 close PIPE or die "bad pipe: $?, $!";
	';

After execution of this statement all 4 variables may have been set.

$@ is set if the string to be eval-ed did not compile (this may happen if open or close were imported with bad prototypes), or if Perl code executed during evaluation die()d (either implicitly, say, if open was imported from module Fatal, or the die after close was triggered). In these cases the value of $@ is the compile error, or Fatal error (which will interpolate $!!), or the argument to die (which will interpolate $! and $?!).

When the above expression is executed, open(), <PIPE>, and close are translated to C run-time library calls. $! is set if one of these calls fails. The value is a symbolic indicator chosen by the C run-time library, say No such file or directory.

On some systems the above C library calls are further translated to calls to the kernel. The kernel may have set more verbose error indicator that one of the handful of standard C errors. In such cases $^E contains this verbose error indicator, which may be, say, CDROM tray not closed. On systems where C library calls are identical to system calls $^E is a duplicate of $!.

Finally, $? may be set to non-0 value if the external program /cdrom/install fails. Upper bits of the particular value may reflect specific error conditions encountered by this program (this is program-dependent), lower-bits reflect mode of failure (segfault, completion, etc.). Note that in contrast to $@, $!, and $^E, which are set only if error condition is detected, the variable $? is set on each wait or pipe close, overwriting the old value.

For more details, see the individual descriptions at $@, $!, $^E, and $?.

#Technical Note on the Syntax of Variable Names

Variable names in Perl can have several formats. Usually, they must begin with a letter or underscore, in which case they can be arbitrarily long (up to an internal limit of 256 characters) and may contain letters, digits, underscores, or the special sequence ::. In this case the part before the last :: is taken to be a package qualifier; see perlmod.

Perl variable names may also be a sequence of digits or a single punctuation or control character. These names are all reserved for special uses by Perl; for example, the all-digits names are used to hold backreferences after a regular expression match. Perl has a special syntax for the single-control-character names: It understands ^X (caret X) to mean the control-X character. For example, the notation $^W (dollar-sign caret W) is the scalar variable whose name is the single character control-W. This is better than typing a literal control-W into your program.

All Perl variables that begin with digits, control characters, or punctuation characters are exempt from the effects of the package declaration and are always forced to be in package main. A few other names are also exempt:

ENV		STDIN
INC		STDOUT
ARGV		STDERR
ARGVOUT
SIG

CONTENTS

#NAME

#DESCRIPTION

#Predefined Names

#Error Indicators

#Technical Note on the Syntax of Variable Names